Application on Metal

Learn this technique with us! Below you find what you need:

Products

Opaque water-based primer (BAS-1)
Water-based glue (GLU-1)
Water-based paint (VAR-2)
Rice paper for Découpage (TT-03)
Stencil (SCM-216)
Smooth effect paste (MD-2)
Cashmere chalky color (SH-140)
Color chalky green (SH-740)
Milk chalky color (SH-110)
White Rice Paper for Decoupage (CRC-00)

Tools and supports:

Watering can
Flat brush 3 cm wide
Scissors
Spatula
Paper tape
Sand paper
Roller

See the other techniques

Watering Can

Step by step

First Step

Spread the paste on the stencil

With the spatula spread the smooth effect paste (MD-2) on the stencil (SCM-216) which has been positioned upside down. Let it dry.

Second Step

Making the base

Lightly sand the metal and then apply the opaque water-based primer (BAS-1) with a clean brush. Let it dry and then apply the chalky latte color (SH-110) with a sponge all over the watering can.

Third Step

Apply the chalky cashmere color

With a roller, apply the chalky cashmere color (SH-140) on the stencil that has been spread on
white rice paper (CRC-00). Repeat several times and let it dry.

Fourth Step

Cut out the flowers

Cut out the stencil flowers painted on white rice paper.

Fifth Step

Paste the label

Glue the label made with the smooth effect paste that was made in the first step. Apply the water-based glue (GLU-1) on the side of the paste and then glue it onto the watering can.